Find the right downlight

New light or replacement?

COB means chip-on-board: several LEDs, the small electronic parts that make light, work together as one source. Start with whether your ceiling already has a hole.

How to measure your old hole

The cut-out is the empty opening in the ceiling. Measure it in millimetres (mm), rather than the size of the light you removed.

1. Switch off the power at the circuit before touching the light.
2. Ask your electrician to take the old light out safely.
3. Measure the opening edge to edge, not the outer rim of the light.
4. Send us a photo with a ruler if you are unsure.

Fits your hole means the documented opening size or adjustable range matches. Close match means within 5 mm; the outer rim must still cover your opening. Check with us before buying. A size marked “to check” is not yet a confirmed fit.

Recessed or surface?

Your ceiling decides how the light can be fitted. A false ceiling is a second ceiling below the main slab, often made from plasterboard.

For a replacement, the existing hole decides the fitting. Surface lights do not fill a ceiling hole.

Which kind of downlight?

These photos show examples from our range. Choose the job first; the Finder shows the exact fitting, available options and price.

Everyday downlight

A fixed light inside a ceiling hole for everyday lighting. Use several together for room or work-area lighting.

Everyday room lighting

Deep or decorative reflector

A set-back source reduces direct glare, the uncomfortable brightness you see when looking at a light. A reflector is the shaped inner surface that helps direct light; its finish adds detail.

Softer view of the source

Trimless

The rim disappears into the ceiling; needs plaster finishing. For a replacement, it needs re-plastering around the hole.

Planned ceiling finishing

Spot you can aim, zoom or wall-washer

Tilt changes direction; zoom changes beam width; a wall washer spreads light over a wall. Choose it for a painting, display or feature wall.

Art and feature walls

Multi-head & laser lines

Several small light sources together in a cluster or line. “Laser” here means a row of small lights. Check the opening and the direction of the light.

Lines or clusters of light

Waterproof

Sealed fittings for bathrooms, balconies and covered outdoor areas. Check the documented IP water-protection rating on the exact light; the name alone does not confirm it.

Bathrooms and wet areas

Round, square or rectangle?

For a new light, choose the shape you enjoy. For a replacement, the hole decides the shape; the outer face can be larger than the opening.

Which look?

The trim is the rim around a light. These are style suggestions. Lights in the look you pick are shown first, and other lights that match your answers are still shown.

Hidden rim means trimless: it needs plaster finishing. Body and reflector colours are finishes; they do not change the light colour.

Body and reflector colours

Body colour is the outer finish. Reflector colour is the inner surface around the source. Both change how the fitting looks; light colour describes the glow. Choose the finishes you like, then check the documented choices on each light.

Metallic finishes include gold, brass, rose gold, chrome, silver, nickel, copper and bronze. The Finder shows only documented options with a matching light. Missing details are marked “to check”; ask us to confirm the finish before ordering.

Which light colour?

Kelvin (K) describes the colour of white light: lower numbers look warmer, higher numbers cooler. Room suggestions are a starting point; choose the shade you enjoy.

Most lights offer warm, natural or cool white, chosen when you order. Other shades (2700K, 5000K or 6500K) are available on request. Check the selectable colour and control for the exact light.

Which control do you need?

Choose the system you already use or prefer. The light and its driver, the LED power supply, must support that system. Check which controls are included.

Tell us your existing dimmer or smart system before buying. A control marked “to check” is not yet confirmed for that light.

How bright, and how many?

W (watts) measures power use. Lumens measure light output, so the same watts can give different brightness. Beam means how widely a light spreads. These are suggestions; every matching wattage stays available.

Always a suggestion: room use, wall distance, beam width, light output and furniture change the layout. Send us your room dimensions and ceiling height for help planning it.

Bathrooms and wet areas

IP is a protection rating for dust and water. Choose the documented rating for the exact light and its position, rather than relying on its name.

A waterproof name alone does not confirm a rating. Where no rating is documented, treat it as “rating to confirm” and ask us before buying.

Upgrade options for your light

Where compatible options exist, they are shown with the exact price difference on each light. Each option belongs to that light, with its own price and availability.

Warranty is part of the tier, not a separate add-on. A choice already selected is not offered again. The difference may be +₹, −₹ or “same price”; the exact light shows it before you choose.

Send your shortlist on WhatsApp

Save the lights you like in the Finder, then use its WhatsApp button.