Garden bollard lights: a buying guide for paths and lawns
Choose a garden bollard light by its look first, then height, light source, light colour, finish and budget. Start with where it will stand and the path or lawn edge you want to light. Range numbers below are from 12 November 2026.
Where should I use a garden bollard light?
A garden bollard is a short post light for paths, lawn edges, flower beds, driveway edges and garden steps.
Choose this type when you want a standing light beside a route or planting area. Browse the 406 garden bollard designs, or narrow your choices with the garden bollard finder.
- For a taller garden pole light, see pole lights.
- For focused light on plants and trees, see garden spike lights.
- For lights set into paving or soil, use the ground light guide and ground light finder.
Which garden bollard look should I choose?
Choose a look that suits your home's outside walls, paving and garden furniture.
Look at the shape in daylight before comparing the light itself. Lanterns feature among the newest designs shown here.
- Modern post: a simple upright shape for straight paths and modern homes.
- Lamp-shade top: a post with a shade-like head for garden seating areas.
- Flat and mushroom top: a flat or rounded cap for paths and lawn borders.
- Side-head and sculpted: an offset head or shaped body for a garden feature point.
- Classic lantern: a lantern-shaped fitting for traditional entrances and planted paths.
- Jaali column: a column with an openwork pattern for decorative garden corners.
- Floor lanterns and planters: low lantern forms or planter-style lights for seating and planting areas.
What height and spacing suit a pathway light?
Choose height for the surrounding planting, and use about 2 to 3 metres between path lights as a starting point.
Height is listed for 333 designs. Use these finder groups as a starting point for your layout:
- Short, up to 400 mm: 92 designs; consider these for flower beds and path edges.
- Medium, 400 to 700 mm: 117 designs; consider these for garden paths and lawns.
- Tall, 700 to 1,000 mm: 102 designs; consider these for driveways and wide lawns.
- Extra tall, over 1,000 mm: 22 designs; consider these for entrances and large grounds.
Try positions on one side of the path, or staggered on both sides. Leave walking space beside each base.
Should I choose bulbs or built-in LED?
Choose built-in LED for an integrated light source, or a bulb-holder model for a separate bulb.
Among bollards with holder details, most have built-in LED. Bulb options include E27 and B22 holders. Check the holder before choosing a bulb.
The product page shows the light source and whether a bulb comes with it. Inclusion options vary, check the product page. Do not assume a photographed bulb is included.
Which light colour suits garden lights outdoors?
Warm white is a good starting point for most gardens, especially near seating and planted borders.
For built-in LED, many bollards offer warm, neutral or cool white choices on the product page. Options vary, check the product page.
- Warm white: about 2700K to 3000K is a starting point for a softer-looking seating corner.
- Neutral white: about 4000K is a starting point if you prefer a more neutral white appearance.
- Cool white: about 5000K to 6000K is a starting point for a bright white appearance near work areas.
Choose the listed colour before ordering. A choice on the product page does not mean the light changes colour after installation.
Which finish colour suits my garden?
Choose the finish after the look, height and light source, using nearby paving and metalwork as your reference.
- Grey and silver: restrained colours beside stone or concrete paving.
- Black: a dark outline beside gates, railings and greenery.
- White: a light-coloured fitting beside pale walls and garden seating.
- Brass, gold and copper: warm-looking colours for traditional garden details.
- Wood and brown: earthy colours beside planting beds or timber-look furniture.
Grey is by far the most common recorded finish. Die-cast aluminium, aluminium and resin are the usual listed bodies. Body options vary, check the product page. A finish colour does not confirm the body material.
What should I check for an outdoor bollard light in rain?
For a light open to rain, check the IP rating stated on the product page.
IP describes how well a fitting keeps out dust and water. The stated rating must suit the chosen position. Do not judge protection from the shape, photograph or product name.
How should I plan wiring for garden lights?
Plan cable routes with a qualified electrician before paving or planting begins.
Use an RCCB circuit, which has an earth leakage breaker. Cables should run in a pipe or be armoured cable. Have the electrician plan the wire point at each light's position.
- Solar garden light: there is a small choice of solar garden lights; check each product page before deciding.
- Motion sensor: there is a small choice of motion-sensor bollards. They switch on when someone walks past and off after a set time. Check whether the product page lists adjustable range, delay or a day and night feature.
How much does a garden bollard light cost in India?
About ₹4,800 per light is the median price, giving you a starting point for a budget.
Prices below are from 12 November 2026. Bands use each design's lowest variant price, including GST. They cover 405 priced designs; one design has price on request.
The product page shows the current price. Keep the budget per light separate from cable, installation and any bulbs needed.
What should I check before buying a garden bollard light?
Confirm the position, look, height, light source, colour, stated IP rating and total budget before ordering.
- Mark paths, lawn edges, garden steps and driveway edges on your plan.
- Choose the look, then check height beside mature planting.
- Confirm built-in LED or the bulb holder, and whether a bulb comes with it.
- For built-in LED, choose the listed light colour.
- Check finish colour, body material, base dimensions and available fixing space.
- For exposure to rain, check the IP rating stated on the product page.
- Confirm cable routes and the RCCB circuit with your electrician.
- Check current prices and model-specific warranty details.
Questions and answers
Choose each garden light for its intended position and confirm the selected model's details before buying.
Can I use a bollard light as a lawn light?
Yes, bollards suit lawn edges and garden paths. Start with the medium height group and check nearby planting.
Can a pathway light also be a driveway light?
A bollard can stand beside a driveway edge. Choose its height for the setting and keep the base clear of vehicle movement.
Is a garden pole light the same as a bollard?
A bollard is a short post light. For taller fittings, browse garden pole lights.
Can I choose a solar garden light?
There is a small choice of solar garden lights. Check the listed model details before including one in your layout.
Can a garden bollard go on a gate pillar?
Choose a fitting intended for that position. Use the gate light buying guide to compare pillar lights.
What warranty comes with an outdoor bollard light?
Warranty depends on the model. Check the product page or ask our team about the selected light.
How do I light garden paths, flower beds and trees together?
Use bollards along paths and flower bed edges, and leave some planting darker for depth. For trees, see garden spike lights, a separate light type. Check the IP rating as listed on the product page for covered or open spots; an electrician should check and fit the lights and any driver for the location.
Jainsons Lights was founded in 1978 and has four showrooms in Delhi. Browse garden bollard lights, use the garden bollard finder, or visit our showrooms. Share your garden plan and shortlisted product links for help choosing.