Garden spike lights: choose spotlights for trees and plants
Choose a garden spike light by where it will sit: soft soil or a firm surface. Then match its beam, light source and colour to the tree or plant you want to light. Range numbers below are from 12 November 2026.
Where should I use a garden spike light?
A garden spike light sits in soft soil and directs light towards trees, palms, shrubs, statues, hedges or garden walls.
Use it to pick out a feature you want to see after dark. Decide what needs attention before choosing the fitting. A plant beside a seat needs a different beam from a tall palm across the lawn.
- For lights set flush in paving or lawns, see the ground light guide.
- For short post lights beside paths, see the garden bollard guide.
- For a whole yard or building front, see site lighting and flood lights.
Which kind of garden spot light should I choose?
Choose a spike for soil, a flat base for firm surfaces, a narrow spot for focused light, or solar where suitable.
The garden spike light collection has 123 designs, including 28 added over the previous year.
- Garden spike lights, 72 designs: a pointed stake pushes into soft soil beside planting.
- Surface spots, 41 designs: a flat base suits paving or walls where the product page lists that fixing.
- Narrow beam spots, 5 designs: focused light suits a tall tree or statue. Browse narrow beam garden spots.
- Solar spike lights, 3 designs: a very small choice. The panel needs direct sun for most of the day. Light hours depend on sunshine and the battery. Check the product page and solar light collection.
For the look, compare plain spot shapes with decorative stems and caps. These latest designs offer different shapes to consider.
Which beam and wattage suit trees and plants?
Choose a narrow beam for tall trees or statues, and a wider beam for bushes, hedges and walls.
About 15 to 24 degrees is a starting point for a narrow beam. About 60 degrees or more suggests a wider spread. The product page states the beam where listed. Some heads tilt; check the movement stated for your chosen model.
Lower watts suit small plants and low shrubs; higher watts suit tall trees and big walls. Of 89 lights with a stated wattage, the recorded bands are:
- Up to 5 W: 30 lights.
- 5 to 10 W: 30 lights.
- 10 to 20 W: 20 lights.
- Over 20 W: 9 lights.
Watts alone do not tell you where the light falls. Match the beam to the feature as well.
Should I choose built-in LED or a bulb fitting?
Choose between a built-in LED light and a fitting that takes a separate bulb, checking the product page for details.
There are 19 bulb-taking designs, with holders including GU10, GX53, MR16 and E27. The product page says the holder and whether a bulb comes with it. Match the named holder when choosing the bulb.
An MR16 bulb runs on 12V and needs a matching driver. Check the supply before ordering; the holder name matters as much as the bulb's appearance.
Which light colour suits a garden?
Warm white is a common garden choice; choose neutral or cool white if you prefer their appearance.
About 2700K to 3000K is a warm white starting point. About 4000K gives neutral white; about 5000K to 6000K gives cool white.
Many lights let you choose warm, neutral or cool white on the product page. Selecting a colour when ordering does not mean the fitted light can change colour.
There is a small choice of RGB colour-changing lights and single-colour blue, red or green lights. Check the controls listed.
Which finish should I choose for garden lights?
Grey is by far the most common finish in the recorded range, followed by black.
Compare the finish with nearby paving, pots and garden furniture. Keep the body finish separate from light colour when ordering.
Listed body materials include die-cast aluminium, aluminium and resin. Material options vary, check the product page. Appearance alone does not tell you the material or protection rating.
How do I choose an outdoor spot light for rain?
Check the IP rating stated on the product page against the spot where the light will sit.
For a position open to rain, IP65 or higher is a suggested starting point. For very wet spots, IP67 or higher is a suggested starting point. Choose by the stated rating, never by the product name.
Options vary, check the product page. Tell the electrician whether the location is sheltered, exposed or regularly wet.
How should garden spike lights be fitted and wired?
Use a qualified electrician to plan the fixing, protected wiring and sealed joints before fitting the lights.
A spike pushes into soft soil. On paving or a wall, use a flat base where the product page lists one. Compare garden surface spot lights for these positions.
About 30 to 60 cm from a tree trunk is a starting point for an uplight. Check the fitting dimensions and leave room to aim the head where adjustment is listed.
- Use an RCCB, an earth leakage breaker, on the outdoor lighting circuit.
- Protect cables in a pipe or use armoured cable. Make every joint in a sealed connector or box.
- Lights marked 12V or 24V need a matching driver of the same voltage. Lights marked 230V connect to mains.
- Choose a driver with a stated outdoor IP rating, or keep it in a dry, covered box. See the driver guide.
How much does a garden spike light cost in India?
The median listed price is about ₹2,100 per light, with choices across the price bands below.
These prices are from 12 November 2026. Each design uses its lowest variant price, including GST. Check the pack contents before comparing.
The product page shows the current price. Ask about wiring, fitting and any separate bulb or driver when planning the total.
What should I check before buying a garden spike light?
Confirm the fixing, beam, light source, colours, dimensions, IP rating and complete cost before ordering.
- Soil spike or flat base, with the required fixing listed.
- Beam suited to the plant, tree, statue or wall.
- Built-in LED or correct bulb holder; bulb inclusion checked.
- Light colour and body finish selected separately.
- Dimensions, head movement and supply checked on the product page.
- Stated IP rating checked for the actual position.
- Electrician, sealed joints, cable protection and any driver planned.
- Current price, pack contents and model warranty confirmed.
Questions and answers
These answers cover common choices when buying a garden light for plants or other outdoor features.
Is a garden focus light the same as a spike light?
A garden focus light describes its use. Check whether it has a soil spike or a flat base for fixing.
Which tree spot light suits a tall palm?
A narrow beam is a starting choice. Check its stated beam and aim before selecting the wattage.
Can I fit an outdoor focus light on a wall?
Use a flat base only where the product page lists wall fixing. For decorative fittings, see the outdoor wall light guide.
Does an RGB spike light come with a remote?
Check the listed controls. A colour option alone does not confirm a remote or app.
Will a solar garden light work under a tree?
The panel needs direct sun for most of the day. Deep shade may make that position unsuitable.
What warranty comes with a garden spike light?
Warranty depends on the model. Confirm the terms for the exact light before buying.
Jainsons Lights was founded in 1978 and has four showrooms in Delhi. Browse garden spike lights or visit our Delhi showrooms. Share a garden photo and the features you want to light for help choosing.